Cement Feeding System Manufacturer from Ahmedabad

Cement Feeding System

We are manufacturer of manual Cement Feeding System which is generally used for convey cement from bulker to silo and unload cement from bags to a silo. In this system, bulker and cement bag can be unloaded to the cement silo.

Minimum Order Quantity1 Unit
Model/TypeJDCFS - II (80 HP)
WeightApprox 2000 kg
Usage/ApplicationCement & Fly Ash Unloading from Bulker or Bag to Silo
Surface PolishingColor Coating
Power80HP (30 HP for Screw & 50HP for Blower)
Driven TypeBoth V-Belt Driven (Compressor & Screw)
BrandJD VACUU SERVICE
capacity35 - 40 TPH
Max Flow Rate950 m3/hr

Approx. Price: Rs 6.5 Lakh / Unit

Cement Feeding System

Cement Conveying System

DESCRIPTION

Cement Feeding System are constructed of mild and structural steel, and mounted on a base. FS pumps are equipped with pedestal blocks that support a pump screw which helps to provide a smooth, balanced operation. The screw is dynamically balanced and areas of this screw, along with other parts of the pump in direct contact with the material to be conveyed, are made of hardened, wear-resistant material and special hard surfacing where required. The screw is directly coupled to the driving motor but can be v-belt-driven.

Standard material on FS pumps includes a pressurized seal and bearing assembly that extends the service life of the discharge seals by preventing the material being handled from entering the bearing area. Each pump system includes the pump, drive motor, and compressed air source.

It is the most versatile and speedy method of transferring bulk material from one point to another within a defined area.

System Features:

You have to make the arrangement to dump the CEMENT / FLY ASH in the powder form in to the feed hopper. The feed hopper will have a screw at the bottom which will continuously pump the material into the convey line. Convey line is connected with high capacity blower to generate the sufficient force to convey the material into the storage silo.

The system will have a facility to convey the loose fly ash which comes into the bulker. Our pre-engineered screw pump and its components are ready for installation and require minimum attention for startup. CEMENT / FLY ASH will be transferred inside the tubing without any obstruction to the Silo. The system proposed herein is totally enclosed and sealed. Adaptor and 10.0 Mtr. Hose for further connection of pumping the material is supply from our scope.

Technical Specifications:

  • Model JDX-I, JDX-II
  • Output Capacity 12-15 Ton/ Hr 22-25 Ton/ Hr
  • Feed Hopper Capacity 500 Kg to 700 Kg
  • Screw Toughened
  • Screw Motor 22.5 KW/ 30 HP 22.5 KW/ 30 HP
  • Twin Lobe Air Blower JDGR-19, JDGR-22
  • Blower Motor 30 kW/ 40 HP 37.5 KW/ 50 HP
  • Structure with wheel/ Anti-vibration Pad with wheel/ Anti-Vibration Pad
  • Power Supply 415 V AC + 10%, 3 Phase 50 HZ + 5%

Applications:

  • The JD VACUUM SERVICE Screw Pumps are heavy duty, screw type pneumatic pumps. These pumps systems are most commonly used to convey dry, free-flowing, pulverized materials from grinding mills, transfer materials from silo to silo, transfer dust from collectors, and load and unload railcars, a pipeline can be run and to any number of delivery points.

Following Accessories Included:

  • Suction Silencer Non-Return Valve
  • Discharge Silencer V-Belt Set
  • Spring Loaded safety valve V- Belt Guard
  • Suction Filter Driven Pulley
  • Dry bag type box filter
  • Dust collection system 
  • Rubber hose pipe set 
  • Control panel 
Special Feature:
  • Less maintenance 
  • Portability with trolley-based structure
  • Oil-free conveyance 
  • Dual functions — manual feeding and balker unloading
  • Interconnected sequences 
  • Ensure contamination-free transfer of material
  • Pressurized seal 
Additional Information:
  • Production Capacity: 5 units per month
  • Delivery Time: 15 to 20 Working Days